Car Ghost Immobiliser
Ghost Immobiliser is an advanced system that blocks your car from starting if it does not have an individual pin code sequence, entered via buttons already in use (such as those on the dashboard or steering wheel). The device is invisible for thieves and is quiet to operate.
It can be helpful in preventing hotwiring as well as newer methods like relay thefts. It could also lower the cost of insurance.
No Radio Frequencies
A car ghost immobiliser functions differently to an ordinary immobiliser because there is no radio frequency sent to prevent it from being able to be bypassed by thieves using a low-cost and easily available key cloning device. Ghost immobilisers stop your car from starting in the event that a thief has copied or stolen your key.
Ghost immobilisers are effective against relay attacks. They involve amplifying the signal from your key fob to trick the system into allowing your vehicle to start. The Ghost will recognize this and not start the car until you enter the PIN code. This is a great method to deter thieves who are tech-savvy who have easy-to-use and affordable equipment to clone your vehicle.
The Ghost can also be installed discretely (without causing any damage to your vehicle) and will only function once the correct pin sequence has been entered. It will only be recognized by the owner who has installed it, which means that no one will be able to use your vehicle unless they know the pin sequence. Some systems allow the proprietor to set up a valet or service mode, which permits them to temporarily let someone else use their vehicle without revealing their pin code. This protects them from opportunistic thefts.
The Ghost is not just easy to use and quick to dearm, but it can be connected to a car tracker, so that you can locate your vehicle. Some insurance companies offer discounts on insurance for vehicles that have Ghosts installed. This is an excellent benefit as it enhances the security of your vehicle.
The Ghost immobiliser, though not Thatcham approved, is an aftermarket item that has been independently evaluated and proved to work. Ask the seller of a pre-owned vehicle that has the Ghost installed if they can transfer it to your vehicle. This will make your new car more secure than it would be in the event that the previous owner had not transferred it.
No Circuit Cuts
Even if your vehicle is stolen, thieves will not be able start it. The thieves will need to know the exact buttons to unlock the vehicle, and they will not be able to accomplish this without knowing the sequences. This will deter them further and make sure that they don't attempt to steal your car at all as they may not be able to leave with the car.
If you have an GPS tracker, your Ghost could also serve as an anti-theft device since it can send an alert to the tracker, which will trigger a siren and notify the tracker of any attempts to steal. This feature can be activated at any time through your online dashboard.
When you connect your Ghost to the CAN data network it will identify your vehicle and its owner by using the unique pin code you programmed during installation. This enables the device to communicate directly with the ECU of your vehicle and immobilise its engine. This means that only the vehicle owner or a person who has the PIN number, is able to start the engine.
The pin code is impossible to guess for any potential thieves since it's made using buttons that are easily accessible by the driver, like cruise control and stereo mute. Your engineer will also provide you with an emergency Pin Code override card which is similar to a scratch-off lottery ticket and simply needs to be scratched off to reveal the code and the directions.
In contrast to traditional immobilisers, which are usually detected by a thief using diagnostics to read the relay of the immobiliser the Ghost is undetectable by these methods because it doesn't utilize radio frequencies or circuit cuts. Therefore, it is unaffected by the latest techniques employed by organized gangs that are experts in RF scanning technology and code-grabbing. It is also a lifetime product, and can easily be removed from your car after you sell it, meaning you will not lose any of the protection that you have put into.
No Key Fobs
In the UK Vehicle theft is increasing in the UK. The need for proactive measures to safeguard your precious cars from opportunistic criminals. The revolutionary Ghost Immobiliser from Autowatch offers a robust defence against key cloning, hacking and signal relay attacks. It is a discreet and highly effective vehicle security system that is simple for anyone to install.
The Ghost immobiliser is not an ordinary system that relies on key fobs. car stolen with ghost immobiliser does not make use of signals relays. It is not affected by signal interference and cannot be activated with stolen or damaged remotes. It's also tamper-proof, and doesn't have any external wiring, making it difficult to take off.
It protects you from key-long hacking, key theft and key-long by stopping your engine from starting until a specific PIN is entered. This is done by using existing buttons within the vehicle, such as those found on the steering wheel or door panels, as well as the central console to create a customisable disarm sequence that can be up to 20 times (like entering a PIN into your smartphone).
It only works if you enter the correct pin code. This makes it impossible for opportunistic thieves to steal your car and is designed to be simple to use. Alternatively, if you're worried about not remembering the pin code, the installer will provide you with an emergency override driver fob which lets you operate your car as usual.
The Ghost immobiliser isn't detected by devices for diagnosis, such as RF scanners, or other tools used by thieves. This stealth installation increases the effectiveness of the system and permits it to be placed in a location that is difficult for thieves.
Ghost immobilisers are an inexpensive and highly effective deterrent to theft. They also increase the value of your car. Some insurance providers will also recognize them and offer lower premiums.
No Damage
If your vehicle is equipped with a ghost ignition system, you will have peace of mind in knowing that your vehicle is safe against hacking, cloning, key-fob theft and other common methods of theft. This is especially crucial if you've spent a an enormous amount of money and time the customization of your vehicle or own a high-value or unique model. Ghost immobilisers work silently leaving no evidence of instillation, and does not require any new parts to be installed.
The system allows you to create a pin number that has to be entered to allow the engine to start. It works by using buttons on your steering wheel or console, or on the door panels. The sequence can be modified by you at any time, ensuring that even if a burglar knows your pin number and is able to start your vehicle. The device can also be deactivated in the service valet mode, so that you can take your vehicle away for servicing or cleaning without it being activated.
This means that even if the vehicle is stolen or cloned the criminal won't be capable of starting your vehicle and could be caught in the act. The system will also notify you of any tampering of the wiring of your vehicle like signal interception or cutting. This information can be sent to your phone so that you are always aware of the security situation of your vehicle.
However, there may be a point at which you want to remove or disable the Ghost Immobiliser to prevent maintenance or resale. In this instance you'll need follow a specific procedure to remove the device without causing harm to the wiring system of your vehicle. Wearing protective gloves and a flashlight is a good idea during this procedure. You may also consult any documentation you might have like user manuals or installation instructions to pinpoint the exact location of the device.
You can then reconnect the battery to the car and test it to ensure that the immobiliser functions correctly and all electrical components are working as intended. The next step is to connect any wires that were cut by using electrical tape or soldering where required. Check to see if any exposed wires are found and that any hanging wires are secured by zip ties or other appropriate methods. Finally, schedule a vehicle check-up with a professional to make sure that the removal process did not cause damage to other systems within your vehicle.